Question: Does Comcast Use DHCP Or Pppoe?

Is Xfinity 2.4 GHz?

xFi Gateways are “dual band,” meaning that they broadcast two separate radio bands for their WiFi network – a 2.4 GHz band and a 5 GHz band.

Historically, you were encouraged to use a different WiFi name and password for each band..

Do I need a technician to install my NBN?

A technician might be required to attend to your premises to complete the installation and make sure you are connected to the NBN network. … If an installation appointment is required, you or an authorised person over 18 years of age will be required to be at the premises on the day of the technician visit.

What is the difference between DHCP and PPPoE?

The difference between PPPoE vs DHCP can be summarized as following: DHCP is a protocol for obtaining IP addresses while PPPOE is a common method of connecting to an ISP. … You would need to have a username and password with PPPOE while the configuration of DHCP is automatic.

How do I connect to 2.4 GHz instead of 5 on Xfinity?

Using the Admin ToolConnect to your WiFi network.Go to Gateway > Connection > Wi-Fi. To change your Channel Selection, select Edit next to the WiFi channel (2.4 or 5 GHz) that you’d like to change, click the radio button for the channel selection field, then select your desired channel number. … Select Save Settings.

What is a PPPoE connection?

Point-to-Point Protocol over Ethernet (PPPoE) combines PPP, which typically runs over broadband connections, with the Ethernet link-layer protocol that allows users to connect to a network of hosts over a bridge or access concentrator.

Is Xfinity static or dynamic?

All Comcast Internet customers have a dynamic IP address. This means that the standard way of identifying your location can change each time you access the Internet. Business-class Internet customers have the option of adding a static IP address — one that does not change.

Should I use PPPoE?

You will use PPPOE. … It is also easier for ISPs to connect to customers over ethernet using PPPOE. There is a good chance that your home internet connection would use PPPOE to connect to your ISP. This helps them in authentication and bandwidth management.

How do I change from 5GHz to 2.4 GHz?

Open your Android device’s settings menu. Tap Wi-Fi then the three dots in the upper-right corner. Tap Advanced > Wi-Fi frequency band. Select the desired radio band.

What kind of internet is Comcast Xfinity?

Broadband is high-speed Internet connection or Internet access. Broadband Internet connection may be provided via a telephone company, Internet service provider or cable company. Broadband—which stands for broad bandwidth—is one of the fastest types of Internet connection available to consumers today.

Which connection is better PPPoE or DHCP?

PPPoE needs to be configured correctly before a user can actually connect to the Internet, however, DHCP doesn’t need to be configured and is basically plug and play. So using DHCP to connect to an ISP eliminates the problems that are associated with PPPoE.

Is Comcast a DHCP?

DHCP mode: Xfinity (Comcast) Router Print To set up CUJO with the Xfinity (Comcast) router you must use – DHCP mode. Since you can not turn off DHCP server on Xfinity router you will need to apply specific configuration. … To connect in DHCP mode you will need to plug ethernet cable in to CUJO bottom port.

Is Comcast a PPPoE?

Comcast does not use PPPoE.

Can I use both 2.4 and 5GHz at the same time?

Simultaneous dual-band routers are capable of receiving and transmitting on both 2.4 GHz and 5 GHz frequencies at the same time. This provides two independent and dedicated networks which allows more flexibility and bandwidth.

How do I change my PPPoE settings?

On the router’s management page, click Network > WAN on the left of the web page: Change the WAN Connection Type to PPPoE. Enter your PPPoE username and password which are provided by your ISP. Click Save to save your settings, then the router will connect to Internet after a while.

Does Comcast block VPN connections?

And, seemingly, some Comcast routers don’t support PPTP protocol, which is a commonly used (less encryption, but less latency and faster bandwidth) VPN encryption protocol. Hence, VPN traffic being blocked by Comcast is rather common.

What is the purpose of PPPoE?

The Point-to-Point Protocol over Ethernet (PPPoE) is a network protocol for encapsulating PPP frames inside Ethernet frames. It appeared in 1999, in the context of the boom of DSL as the solution for tunneling packets over the DSL connection to the ISP’s IP network, and from there to the rest of the Internet.

Why is PPPoE used?

PPPoE uses standard methods of encryption, authentication, and compression specified by PPP. PPPoE is configured as a point to point connection between two Ethernet ports. As a tunneling protocol, PPPoE is used as an effective foundation for the transport of IP packets at the network layer.

Does NBN use PPPoE?

All nbn™ FTTN and FTTB must use an nbn-ready VDSL2 compatible modem to connect to the internet on the nbn™….nbn™ Fibre to the Building (FTTB) or Fibre to the Node (FTTN)DSL Standard/Mode/Modulation:VDSL2Connection Type/Mode/WAN Type:PPPoEVDSL Profile:No VLAN Tag3 more rows•Jun 17, 2019